• JIT-DAQ-V3.0

USB / serial bus performance

  USB2.0 high speed bus transfer

  Onboard 1kB Cache

  2.5KV isolation serial communication

analog signal input

  analog input channels: 16 single-ended

  input port voltage: -10--10V

  input signal range: -10--10V (PGA = 1), - 5V-5V (PGA = 2), - 2.5V-2.5V (PGA = 4), - 2V-2V (PGA = 5), - 1.25 V-1.25V ((PGA = 8), - 1V-1V ((PGA = 10), - 0.625V-0.625V (PGA = 16)

  Analog input impedance: 10M

  Resolution: 12Bit (4096)

  The maximum total error: <0.2%

  Programmable Gain: 1,2,4,5,8,10,16

  sampling clock: 100sps-200Ksps internal, external clock

analog signal output

  analog output channels: 2 single-ended

  Analog output range: 0-10V

  analog output current: 5 mA

  Resolution: 12Bit (4096)

  Non-linear error: ± 2LSB

  Scan Clock: 1sps-1000Ksps internal clock

digital signal input / output

  input / output channels: 8

  input / output modes: full input / full output

  Input level: TTL (5V) or CMOS (3.3V)

  Output Level: CMOS

PWM measurement input

  Number: 1

  Input voltage: 0-3.3V

  Input Frequency: 1-200KHz

  input duty cycles: 1% - 99%

  frequency and duty cycle measurement error: 1%

Counter

  The number of counters: 1

  Input level: TTL (5V) or CMOS (3.3V)

  count bits: 32 (up to 65535 * 65535)

PWM output

  PWM output channels: 2

  PWM Output Level: CMOS

  input duty cycles: 1% - 99%

  Output frequency: 1-1MHz

serial port settings

  Baud rate: 115200 :   data bits: 8 :   Parity: None :   Stop bit: 1

 

  Communication protocol: Modbus Rtu

JIT-DAQ-V3.0

  • مدل کالا: استعلام گرفته شود
  • موجودی: استعلام گرفته شود
  • 0تومان

  • قیمت بدون مالیات: 0تومان