• JIT-DAQ-v7.2

32 single-ended / 16 differential inputs

16bit​​150KHZ AD.

AD input basic range Bipolar: ± 10V / ± 5V / ± 2.5V, unipolar: 0--10V / 0--5V / 0-2.5V.

hardware jumper to select AD input basic range: ± 10V / ± 5V / ± 2.5V / 0--10V / 0--5V / 0-2.5V.

 

 

switch: 8 into (IN1-IN8) / 8 into (OUT1-OUT8) (5V -TTL level).

AD Start: software trigger.

AD conversion clock: internal (100sps-150Ksps).

AD input channels automatic sequence scanning, the user can set the conversion sequence, and set the corresponding channel gain factor.

 AD conversion modes are single-channel single conversion mode, single-channel continuous conversion mode, continuous channel scan mode.

Note:

1. Continuous channel scan mode per channel sampling clock: When using a continuous channel scan mode, if you set the sampling clock is 100Khz, assume continuous acquisition consecutive 0-3 total four analog channels, the single-channel sampling clock for 0 of the total Sampling clock / sampling number of channels, namely 100Khz / 4 = 25Khz.

AD section:

32 single-ended / 16 differential inputs. Enter programmable amplification, 4-speed gain multiples: 1,2,5, 10 (1,10,100,1000).

AD converter: 16 AD, single-channel conversion rate 150kHZ; 6-speed conversion range: ± 10V / ± 5V / ± 2.5V / 0--10V / 0--5V / 0-2.5V.

maximum common mode voltage ± 12 volts. CMRR> 80dB.

input jack: 3.98mm terminals.

input channels support automatic scanning continuous channel.

System accuracy: ± 0.05% FSR.

Resolution: 16 bit

Switch input and output

8 input channels, performance:

1. Input voltage: TTL level compatible 3.3 volt level.

2. High: more than 2 volts.

3. Low level: less than 0.8 volts.

4. Input voltage range: 0-5 V

8 output channels, performance:

1. Output voltage: 5 volt level, compatible with TTL level.

2. High: greater than 2.5 volts.

3. Low level: less than 0.5 volts.

4. Maximum output current: 10 mA / road.

5. Switch output power is automatically cleared.

Software support:

labview, labwindows / CVI, VB.net, C #, delphi, matlab, Vc

Other features

Bus: meet the USB2.0 standard

Power supply: external 12-volt power supply.

external power supply input voltage: 12 V, ± 5%.

Internal board size: 12cm x 8.3cm

JIT-DAQ-v7.2

  • مدل کالا: استعلام گرفته شود
  • موجودی: 1
  • 0تومان

  • قیمت بدون مالیات: 0تومان